How to wash linoleum in the kitchen: effective ways to care for the coating

How to wash linoleum in the kitchen: effective ways to care for the coating

How to wash linoleum in the kitchen: effective ways to care for the coating

Linoleum is an aesthetic and democratic variant of floor covering for any kitchen. It is able to withstand the mass of external factors: moisture, sunlight, chemical agents, mechanical influences. But in parallel with the whole set of advantages of the material, there are also objective drawbacks: it gets dirty and quickly acquires spots, as a result of which it loses its original gloss. In this regard, inevitably arises a difficult question: how to wash the linoleum in the kitchen and return it to its former form? Further, we thoroughly understand the subtleties of the care of the coating.

Basic rules of care

Illiterate maintenance of floor covering is fraught not only by the loss of its aesthetic appearance, but also by deformation. In order to avoid these troubles, it is necessary to know how and how to wash linoleum in the kitchen - to your attention the basic details, the observance of which will prevent mistakes in the care of the finish.

linoleum

Linoleum - a stylish and practical option for finishing the kitchen floor

Basic nuances of wet cleaning

Immediately note that the first wet cleaning is recommended to be carried out not earlier than two weeks after laying the linoleum - before that it is better to confine yourself to easy cleaning with a dry vacuum cleaner. When the designated period will be maintained, you can begin to wash the floors with water with the addition of neutral cleaners. The latter must be completely dissolved in the liquid.

The most budgetary, but at the same time effective version of the cleaning agent for linoleum is soap. Scheme maintenance coverage is simple: the first stage - wipe the surface with a soft woolen cloth, moderately soaked in a warm soap solution; the second stage - thoroughly rinse the soap with cold water and wipe the floor with a microfiber or similar in texture with a napkin. To use brushes and hard jaws in work is extremely undesirable - they can scratch the floor.

soap-crumb

Soap crumb is the cheapest and most common floor cleaner

Important! It is advisable to wash the cover parts so that the solution does not stay on the linoleum for a long time - the soap dries quickly and can damage the outer layer of the finish.

An alternative soap, but an equally affordable means for washing linoleum is a dishwashing liquid. The scheme of its application is similar, as in the previous case, with alternating washing with warm and cold water. Another option for maintenance finishing - products designed specifically for the care of linoleum. It is important that they do not contain chlorine, abrasive particles and acetone. Use the finished detergent formulations strictly according to the manufacturer's instructions.

cleaning the floor

Soft napkin and soap solution - a standard set for wet cleaning

Special means for linoleum

If the task is not only to wash the floor covering, but also to improve its aesthetic and performance qualities, use special means - linseed oil or mastic. The first will allow to give to linoleum the expressed shine and will protect it from occurrence of small cracks. Use linseed oil is very simple: wipe the surface with a working composition, and then polish it with a silk rag. Repeat the procedure should be no less than once a quarter.

If for you the question is urgent, than to wash linoleum, so as not to lime, pay attention to the second special means - mastic. It will also give a shine coating, but will additionally make it more practical and well-groomed. The most important condition for obtaining the desired result is to clearly adhere to the dosage of the product, which is indicated on the package.

Complicated cases of floor maintenance

The above suggested methods of cleaning are suitable only for standard regular care of the coating, but there are a number of specific cases when it is necessary to resort to more serious measures. Removing stale dirt, caring for embossed finish, cleaning the floor after repair - how and what wash linoleum in these difficult situations?

Stain Removal

The key to successfully fighting stains is to use the right tools. They should be selected depending on the scale and nature of the contamination:

  • Coffee and food colors. The most effective means - turpentine: apply a few drops of the substance on a soft cloth and gently wipe the contaminated area.

Important! If artificial linoleum is laid on your kitchen, you must be careful with turpentine - do not apply more than two or three drops of the composition to the rag so as not to damage the top layer of the material.

  • Ink and markers. With spots, gasoline and kerosene will best cope. As a working tool you can use a fine-grained sandpaper or melamine sponge. After eliminating the contamination, the treated area must be polished with a silk rag, lightly moistened with natural linseed oil, to restore the coating to its former shine.
kerosene

Kerosene - an effective remedy against ink stains

  • Wax. Remove the frozen wax drops with a flat knife or a spatula. The remaining stains should first be wiped off with gasoline, and then washed with cold water.
  • Rust. To get rid of rusty stains, wipe the floor with a soft cloth soaked in a weak bleach solution: 1 part of the cleaning compound for 10 parts of warm water. For reliability, the finish can also be treated with lemon juice.
  • Iodine. A proven product is soda. First, pour the compound onto a damp rag and, for a few minutes, attach it to the stain, and then wipe the contaminated area with the same rag. If the stain does not disappear, repeat the procedure.
  • Zelenka. To get rid of even fresh spots, camphor alcohol will help: apply two or three drops on a soft napkin and gently wipe the contaminated surface.
dirty linoleum

Zelenka can be quickly washed with camphor alcohol

  • Gary and fat. Deep kitchen stains, from which you can not get rid of ordinary soap or powder, you need to clean in several stages: the first - using turpentine or gasoline, the second - using a solution of lemon juice and detergent.
  • Stripes from shoes. Black footprints from shoes can be removed with an eraser: rub the dirt with an elastic band, and then wash the floor with a soap solution.

Care for a raised linoleum

Ribbed finish looks very impressive, but for a beautiful view it is necessary to pay for your time and efforts, since servicing of non-standard floor is associated with some troubles: firstly, the relief coating quickly collects dust and dirt by virtue of its texture, and secondly, it will not be possible by means of a usual rub. Hence the logical question: how to wash linoleum with an unusual ribbed surface?

1
linoleum

Relief linoleum requires a special approach to maintenance

The main working tool in the fight against pollution is a brush with soft bristles. Prepare a soapy solution in the proportion of 100 g grated soap per 10 liters of warm water, and then, wetting the brush in the resulting composition, consistently begin to clean the coating. Do not rub the floor so that the brush does not damage the finish. Another gentle option for a relief linoleum is a washing vacuum cleaner with special swiveling attachments.

coating cleaning

To clean the relief coating, it is recommended to use soft brushes

Note! To protect the relief trim from frequent exhausting brushing with a brush or vacuum cleaner, you can conduct preventive maintenance every two days: wipe the surface with a soft ribbed sponge.

Cleaning linoleum after repair

The first thing to do when starting repairs is to protect the kitchen linoleum with plastic wrap or thick paper. But do not think that this is guaranteed to save the finish from all the negative external factors. Practice proves: pollution on the flooring can not be avoided anyway. How, then, to deal with the consequences of repair?

If there is paint on the floor, it must be removed still freshly until it is dried. The water-emulsion compound can be wiped off with a usual wet napkin, but with oil it will be more difficult: first the stain should be removed with a dry cloth, then soak with sunflower oil and rinse with soapy water. If the paint is already withered, only the solvent will help. But it is important that it does not contain acetone.

Another common question - how to clean the linoleum in the kitchen from the mounting foam? There are several effective options:

  1. cut the foam with a knife, and on the remains of the building material, put a richly moistened rag - when the moisture softens the foam, remove it with a spatula and wipe the contaminated area with a dry rag;
  2. Spot a special foam cleaner on the coating;
  3. Cut the foam with a knife and work the area with the rest of the material with a solvent without acetone.

Important! After removing the mounting foam, linoleum should be rubbed with linseed oil.

If, after the repair work on the coating, there are light stains and a white coating, they can be washed with ordinary warm water. The main thing is to change the water two or three times in order to get rid of the building dust. In those difficult cases, when the divorce remains, walk on them with a rag soaked in a weak solution of vinegar or potassium permanganate.

cleaning

To get rid of dust after repair will help habitual wet cleaning

Renovating linoleum in the kitchen

If the cleaning of the coating did not give the desired result and the finish still looks pale and not very attractive, you can resort to a more radical step - the renovation of the outer layer of the floor. For this purpose in building stores, you can find a lot of mastic on the basis of wax.

mastic

Wax mastic - a popular tool for prompt renewal of linoleum

In order not to admit mistakes in this matter, let's consider how to update linoleum at home:

  1. Wash the floor well-there should be no stains or dust on it. You can use special compounds to remove dirt and old polish.
  2. Dry the surface dry with rags - this will avoid divorce.
  3. Prepare the wax mastic and consistently apply the working material to the surface of the finish: pour the composition onto a 2 m plot and carefully spread it over the floor with a roller or a special mop. Applying mastic is recommended by moving perpendicular to the window to make less visible possible polishing holes. To facilitate the work, you can use a special polishing machine.
  4. 10 hours after application of the mastic, when it completely dries, walk on the surface with a dry vacuum cleaner. Do not wipe the floor with a wet cloth.
a vacuum cleaner

Vacuum cleaner - gentle device for caring for an updated floor

Video: care for linoleum at home

How to wash linoleum with improvised means

How to quickly update the floor with your own hands

As you can see, there are many effective ways to care for linoleum. In front of you, proven options for both standard washing and cleaning specific stains - thanks to them you can not only keep the cover clean, but also update the finish if necessary, thereby prolonging the life of the coating.

1
1 Звезда2 Звезды3 Звезды4 Звезды5 Звезд
Loading...
Like this post? Please share to your friends:
Leave a Reply

55 − = 52

;-) :| :x :twisted: :smile: :shock: :sad: :roll: :razz: :oops: :o :mrgreen: :lol: :idea: :grin: :evil: :cry: :cool: :arrow: :???: :?: :!:

map